January 2011 Issue
A summary of this month's contents.
USB-Sensing Mains Power Switch
This useful accessory powers up your computer peripherals automatically and powers down devices when PC sleeps. By monitoring a USB port, it detects activity and turns other mains-powered accessories on (or off, when your system hibernates). Configurable for either desktop PC or laptop operation. Main relay output, straightforward 555 and TTL design. As usual, all constructional details are included in full colour along with full photography enabling you to construct this design with confidence.
433MHz UHF Remote Switch
This popular type of project is ideal for wireless remote control of practically anything within an open range of 200m or so. The transmitter is PIC 12F675-powered and sends a burst of radio signal with the press of a button, or, when an external signal triggers it. Absolutely no power is consumed by the transmitter in between times. The receiver also uses a PIC 12F675 chip. A pair of pre-aligned 433MHz modules are used meaning no set up is necessary, and up to five different channels may be used to prevent interference from neighbouring systems.
A.M. (Medium Wave) Broadcast Band Portable Loop Antenna
This simple passive MW loop aerial works well indoors and is easy to construct. The weak signal enhancing performance was found to be absolutely outstanding. 
AM/ MW Instructables web link
Multi-purpose Car Scrolling Display (Part 2)
This mini dot-matrix scrolling LED display started as a car dashboard display, but can be used in any measurement or data logging application where 9-12V d.c. is available. Monitors up to six signals, eg speed, fuel, battery, cabin temperature, ECU data, and displays up to 10 computed values in a scrolling or static readout, on its 7 x 15 dot matrix LED. Two output channels for relays or buzzers, data logging is performed via USB upload to a PC.
In Part 2 this month, details of construction and software installation are covered. In Part 3 next month the software is described in depth.
Teach-In 2011 (Part 3)
Our widely praised tutorial series lays bare the workings of the diode, Zener diode and basic power supplies, and how to use light-emitting diodes correctly.
Also in the January 2011 issue of EPE:
- Circuit Surgery – our hugely popular column analyses in depth the aspects surrounding the simulation of an LED-lighting circuit centred upon commercial Cree leds.
- PIC n MIX – our monthly feature for PIC fans looks into Microchip’s ID3 in-circuit debugger.
- Techno-Talk – on the exciting prospects that one-atom thick ‘graphene’ heralds, and the intriguing evolution of body-to-body networks.
- Practically Speaking – our workshop guru Robert Penfold shows the way to successful soldering.
- Net Work-the Internet column suggests some mobile location tracking GPS applications.
All this and more in the #1 hobby electronics magazine – subscribe now!
